10202017Fri
Last updateWed, 18 Oct 2017 2am
>>

The first on-site house has been printed in Russia

 

The first house printed using mobile 3D printing technology has been built in Stupino town, Moscow region. The Apis Cor and PIK companies have successfully completed the project which was announced in December 2016.

HOW IT WAS BUILT

In December 2016, the Apis Cor company in cooperation with PIK proceeded to print the building using a mobile 3D printer. Construction took place at the Apis Cor company’s test facility in the town of Stupino, on the territory of the Stupino aerated concrete factory. Printing of self-bearing walls, partitions and building envelope were done in less than a day: pure machine time of printing amounted to 24 hours.

After completing the wall structures, the printer was removed from the building with a crane-manipulator.

The area of the printed building is 38 m².

For the first time in the Russian construction practice a house was printed as a whole, rather than assembled from pre-printed panels.

Design of the single-story residential house is rather unusual. This project was selected specifically, as one of the main purposes of this construction is to demonstrate the flexibility of equipment and diversity of available forms. The house can be of any shape, including the familiar square shape, because the additive technology has no restrictions on design of new buildings, except for the laws of physics. It means it’s time to talk about the new fantastic potential of architectural solutions.

The house was erected in the coldest time of the year. Winter has added complexity to the project participants, as the use of concrete mixture, that is used as the printing «ink», is only possible at temperatures above 5° C. Although, the equipment itself is able to operate in temperatures down to minus 35° C. The problem was solved by setting up a tent which provided the required temperature.

Soon, using new materials, such as geopolymer, you will be able to print a house at any time of the year.

WHO HELPED

The developer of the unique equipment, Apis Cor, approached the matter of erecting the house throughly and invited five companies as partners, known for their innovative approaches.
www.apis-cor.com

 

First 3D printed pedestrian bridge in Madrid

The world’s first 3D-printed pedestrian bridge. Inaugurated December 14 in the park of Castilla-La Mancha in Alcobendas, just south of Madrid in Spain, the 40-foot-long is made up of eight parts, each one comprising layers of fused concrete powder micro-reinforced with thermoplastic polypropylene. The bridge is the brainchild of the Institute of Advanced Architecture of Catalonia, a Barcelona-based research and education center that worked with a contingent of architects, mechanical and structural engineers, and municipal representatives to bring the design to life.

Kindom of Saudi Arabia looks into solving housing crisis by 3D-printing of homes

Saudi Arabia conventional buildingsSaudi officials have begun studying the use of 3D-printed houses as a way to solve the housing crisis in the Kingdom, which is expected to affect some 1.5 million people during the next five years. The homes are printed in prefabricated panels, which are fit together on site.

Sheikh Mohammed: 25% of Dubai’s buildings will be 3D printed by 2030

Vice President and Prime Minister of the UAE and Ruler of Dubai, His Highness Sheikh Mohammed Bin Rashid Al Maktoum, has launched the “Dubai 3D Printing Strategy,” a unique global initiative that aims to exploit technology for the service of humanity and promote the status of the UAE and Dubai as a leading hub of 3D printing technology by the year 2030.

Sounds into Ceramics: 3D Printer Uses Sonic Vibrations to Make Patterns in Clay

In a fantastic melding of art and audio visualization, two Dutch artists have created a 3D ceramics printer which translates sound and music into textures in clay vessels. In their “Solid Vibration” project, spatial sound designer Ricky van Broekhoven and designer Olivier van Herpt mounted a powerful speaker beneath a platform on which lines of clay are laid down by a ceramic print head. Different frequency notes translate into large and small wiggles in the lines of clay.

Creative studio prints mini metropolis with 3D printer by Roland DG

Belgian design studio Next Issue has printed an entire city in 3D using the Roland ARM-10 3D printer. The skyscrapers and modern architecture remind one of New York. The buildings have a maximum height of 6 cm and are extremely realistic representations of modern-day buildings. "It's fantastic to see how even the smallest design details are printed with such precision. It also offers a lot of satisfaction to be able to see one's creative fantasies become reality," says Maarten Bloemen, 3D designer.


  • Latest Post

  • Most Read

  • Twitter

Who's Online

We have 301 guests and no members online